Contact Us

01603 304306

District Heating

District heating is the use of a centralized boiler installation to provide heat for a number of buildings.

District heating schemes, supply heat from a central source directly to homes and businesses through a network of pipes carrying hot water. This means that individual homes and business do not need to generate their own heat on site.

Heat networks are firmly established in other countries but currently provide less than 2% of the UK’s heat demand. In April 2009 the Department of Energy & Climate Change commissioned an assessment of the technical potential and costs of district heating in the UK. This showed that in the right conditions heat networks could:

• supply up to 14% of the UK’s heat demand

• be a cost-effective and viable alternative to individual renewable technologies while reducing the cost of energy for consumers

 

Boilers which burn wood fuels such as wood chips and pellets tends to be physically larger and more expensive than equivalent gas or oil boilers. This is partly as a result of the physical requirements for a high temperature combustion environment and transporting the solid fuel. As boilers get larger however the disparity with gas and oil boilers becomes comparatively smaller, and so wood fuel becomes more economically attractive, especially for installations of the scale of a few hundred kW.

District heating makes use of these cost advantages, as well as the administrative benefits of using a single boiler installation to provide heat to a number of buildings. These might be a number of individual houses, blocks of social housing, local council offices, a school, etc.

District heating is much more common in some European countries than in the UK. In Denmark for instance district heating provides around 60% of heating. However there are now a number of successful district heating schemes in the UK, both using fossil fuels and biomass.

A typical district heating installation consists of a highly insulated “heat main” of flow and return pipes distributing hot water (or steam) past all buildings which might be connected. A junction point allows easy connection to each building, from which hot water can be taken from the main to a heat exchanger (heat substation) within each building. The heating circuit within the building is thus isolated from the heat main. Temperature measurement of the flow and return lines, plus a flow meter (together forming a heat meter), allow the actual heat usage within each building, or even apartment, to be separately measured, and delivered heat billed for accordingly. Remote meter reading by modem, secure web interface or drive-by are all possible, as are remote diagnostics to ensure reliable operation.

 

 

EEA Regional Award winner EEA National Award winner EEA National Boiler Award winner MCS Elecsa REC FGAS BPEC Green Deal